fbpx
Chat with us now
Chat with us

Royal Dental Laboratory (RDL)

Royal Dental Laboratory has used world’s latest and most advanced technology for making Dental Crowns and bridges for long term dental prosthesis. With the help of in house CAD-CAM technology, CBCT and 3D printing technologies, Royal Dental Laboratory has developed seamless processes. From designing a dental crown to fabricating; all happens in just one day.

In recent times, its superior solutions for oral care has given remarkably outstanding results. Not surprisingly, each day at Royal Dental Laboratory goes by in more research and developmental work, which, in turn, enables them to innovate solutions in the world of dentistry.

Patients at Royal Dental Clinics are shown their dental scans both before and after their treatment. Despite its same-day solutions, its patients are advised regular necessary check-ups and teeth balancing along with maintaining their teeth in good health post the one-day treatment. In addition to ‘same day fixed teeth’, Royal Dental Clinics has carved a niche for itself with its Full-mouth Rehabilitation or Beautification procedures.

Royal Dental Technologies for Crowns

3D Imaging For Bone Structure; Carestream 9300

CS 9300 was introduced at Royal Implant in 2018 and has been ideal for dental and maxillofacial cases due to its highest FOV value. The airway analysis and CBCT scan helps to get the 3D printing file for fabrication. It features dual modality panoramic and 3D imaging with exceptional detail and range, which helps perfect all-in-one solution for our practice. Its all-in-one system in addition to 2D and 3D diagnostic imaging gives precise digital 3D models for applications, including cosmetic surgeries, periodontics, endodontics and implant planning.

Along with its exceptional 3D imaging capabilities, the CS 9300 also features 2D digital panoramic imaging with variable focal trough technology and can even be upgraded to include one-shot cephalometric imaging. This combination is helpful in planning most of the complicated surgeries related to head and neck. This scanning procedure helps to understand the concerns of patients within few seconds while they are on the dental chair. We can even deliver results on the same day as desired by the patient.

Extra-oral Scanner For Dental Crowns; Medit Identica T500

Dental cast is a copy of patient’s teeth and mouth structures for diagnostic purposes. It is used as a model for further casting of dental prosthetics such as bridges, crowns, implants, dentures, and partial dentures. Royal Implant Mumbai uses Medit coloured-scanner for a powerful scan of this cast and patient’s bite. Its evolutionary design and high- tech features helps doctors to get precise scanning at Royal Dental Laboratory. It has unsurpassed speed, accuracy and reliability such that our treatment planning can be done precisely.

Royal Dental Clinics involves itself in research and developmental work, which enables them to come up with innovative dentistry solutions. With the high-speed camera and projector, we can scan a full arch in just few seconds and this helps us to plan our treatment and results on same day.

3D Printing of Facial Anatomy; Formlabs Form 2

Additive manufacturing or 3D printing at Royal Dental Laboratory allows to produce dental crowns very quickly. This process can be done by the person scanning and planning itself. It makes possible to get a scan of the patient’s teeth, model it and to directly print the dental crown. Royal Dental Clinics plans patient cases and then prints the design via Formlabs Form2. Dental 3D printing is a key at Royal Laboratory for modern dentistry solutions, as it really helps for customisation and accurate planning. Additive manufacturing also has an important role in dental implant surgery including zygomatic implant surgeries.

It is actually possible to create a 3D model to replace a missing tooth with more accuracy than with traditional methods. We can even produce crowns very quickly by scanning the patient’s teeth, modelling it and printing the crown. Royal Dental Laboratory has been one of the early adopters of 3D printing technology a Dental Clinic in Mumbai.

Computer Aided Design For Dental Crown; Exocad Valletta 2.2

The start of every engineering process begins in the world of CAD. Royal Dental Laboratory offers Exocad; an integrated software solution that guarantees the seamless functionality of the digital workflow. From virtual, prosthetic-oriented implant planning with exoplan to designing surgical guides with the Guide Creator. The software supports the design of dental restorations that can be produced at chair-side: inlays, onlays, crowns, veneers, bridges, and pontics.

Royal Laboratory has extended capabilities in Excoad, to do digital smile designing, creation of implant prosthesis, creation of provisional without crown cutting, creation of surgical splints, creation of surgical guides etc.

Computer Aided Manufacturing For Dental Crowns

CAD-CAM dentistry is a field of dentistry and prosthodontics using CAD-CAM (Computer-Aided-Design and Computer-Aided-Manufacturing) to improve the design and creation of dental restorations, especially dental prostheses, including crowns, crown lays, veneers, inlays and onlays, fixed dental prostheses bridges, dental implant supported restorations, dentures (removable or fixed), and orthodontic appliances. CAD-CAM technology allows the delivery of a well-fitting, aesthetic, and durable prostheses for the patient.

CAM is an application technology that uses computer software and machinery to facilitate and automate manufacturing processes. It uses computer-driven manufacturing processes for enhanced and streamlined manufacturing, efficient design and superior machinery automation.

Without CAM, there is no CAD. CAD focuses on the design of a product or part. How it looks, how it functions. CAM focuses on how to make it.

Dental Crown Fabrication; XTCERA - X Mill 300

X-mill 300 is a four-axis joint dental carving and milling machine which has an integrated design, so that the work area can be simplified. It has 4-axis dry milling processing which helps mill inlays, onlays, crowns, veneers, bridges, and pontics. Not every tooth can be treated with CAD-CAM dentistry, so your dental professional will decide whats best. Because precision and fit are essential for your dental restoration, the practitioner may prefer using the conventional laboratory method for complex fabrications.

You may visit Royal Dental Laboratory to know about CAD-CAM technology and how it may impact your restoration appointment.

Prosthesis & Bridge; CORiTEC 350i - Imesicore

The CORiTEC 350i processing system from Germany is an innovative machine concept, developed to meet our requirements of modern CAD/CAM processing. The processing of all relevant prosthesis materials of Composite Resin (SAPT.resin, SAPT.CemResin, SAPT.3Dresin), PMMA (SAPT.multiCOM), Porcelain/Zirconia, High- impact polymer (SAPT.HIPC) and SAPT.BioPEEK is possible with a single machine system, virtually without restrictions. Its 5-axes simultaneous wet/dry processing for exceptional speed and precision is commendable. 350i’s process capability for all dental materials including metals for greatest versatility. Along with the 5-axis CORiTEC 350i – imes – icore, we also have a number of 4-axis imported machines for CAM.

Using modern laboratory methods, your dentist would prepare your tooth, make an impression, and create the fin al restoration in a single visit.

Dental Machinery